All times are UTC + 10 hours [ DST ]


Forum rules


Information in this forum is not guaranteed to be complete or correct. If you are able to provide additional information or corrections, please reply in the topic concerned or send a private message to the topic originator.



Post new topic Reply to topic  [ 114 posts ]  Go to page 1, 2, 3, 4, 5 ... 8  Next
Author Message
 Post subject: Mazda RX-7 SA22C (1978 - 1985)
PostPosted: Sun Aug 31, 2008 11:07 am 
Offline
Get a Girlfriend
User avatar

Joined: Mon Mar 28, 2005 6:19 pm
Posts: 2680
Location: Sydney Inner West
This thread is updated and corrected regularly

Please feel free to add extra information or provide corrections... Provided you have documented proof or first hand experience!
Build dates for Australian released models*.
    RX7 Series 1 Build 02/79 ~ 10/80
    RX7 Series 2 Build 11/80 ~ 09/83
    RX7 Series 3 Build 10/83 ~ 12/85
Chassis numbers not available at this time.
* Information provided from Mazda Australia P/L.

Following is a 79-85 model overview which was previously on the Mazda website but removed many years ago. Retrieved via archive.org by KYPREO in April 2016...
Attachment:
rx7 model info from Mazda website - 21.4.2016.PNG
rx7 model info from Mazda website - 21.4.2016.PNG [ 204.91 KiB | Viewed 6157 times ]


1978: Cumulative production reaches 1 million units for rotary-engine cars.
    Mazda introduces the Mazda Savanna RX-7 (RX-7).
    The 300,000th Mazda imported to Australia, a new RX-7 rotary.

Production Information (world wide)
Model: 1979 SA22C######
Commonly known as Series 1
Series 1 RX7 TV Ad (USA)
Series 1 Savanna RX7 TV Ad (Japan)
Series 1 Savanna RX7 TV Ad II (Japan)
Series 1 Savanna RX7 TV Ad III (Japan)
SA2=RX7 2=1146cc 12a Rotary C=Coupe ###### =Serial/Chassis Number

Worldwide:
Built March 1978 - June 1979
Chassis Numbers: 500001 – 568500

Australia:
Built Feb 1979
Chassis Numbers: 541117 - ??? (earlier chassis number will probably indicate JDM import)

Model: 1980 SA22C######
Commonly known as Series 1
SA2=RX7 2=1146cc 12a Rotary C=Coupe ###### =Serial/Chassis Number
June 1979 – September 1980
Chassis Numbers 5685001 – 650000 (worldwide)

Series 1 Specifications (Approximate)
    Engine Type 12A
    Displacement 1146 cc
    Power output 75kW @ 6,000rpm (approx 100hp)
    Torque 144Nm @ 4,000rpm
    Approx. weight 1050kg's.
    Redline 7000 rpm
    0-100KPH 9.5 seconds
    Qtr. Mile 17.0 s@80 mph
    Lat. Acc. .78 g
    Top Speed (est) 195kph or 122 mph

Gear ratios and speed in gear @ 6,000rpm:
    First ......... 3.674 ... 47kph
    Second ...... 2.217 ... 77
    Third ........ 1.432 ... 119
    Fourth ....... 1.000 ... 170
    Fifth ......... 0.825 ... 207 = 34.5kph per 1,000rpm

Final drive ratio (Diff): 3.9:1
Tyres: 185/70HR13 or 165HR13
Wheels: Alloy 13 x 5.5"

Capacities:
    Fuel 55 litres
    Coolant 9.5 litres
    Engine Oil 4.2 litres or 5.2 with EOM filter change.
    5 speed transmission 1.7 litres
    Rear axle 1.2 litres

Recommended Lubricants (as per Haynes manual):
Engine
    -10° to +50°C ...20W/50
    -10° to +40°C ... 20W40
    -18° to +50°C ... 10W/50
    -18° to +40°C ... 10W/40
    -18° to +30°C ... 10/W30

Dimensions:
    Width 1675mm with side protector moulding... 1650mm without
    Height 1260mm
    Length 4285mm
    Wheelbase 2420mm

Model: 1981
Commonly known as Series 2

1981 Series 2 RX7 TV Ad (Aus)



1984 Series 2 RX7 TV (Aus), celebrating Allan Moffatt's 1983 ATCC win



Series 2 RX7 TV Ad (USA)
Series 2 RX7 TV Ad II (USA)

SA2=RX7 2=1146cc 12a Rotary C=Coupe ###### =Serial/Chassis Number

November 1980 - June 1982
Chassis Numbers 650001 – 700000
In Australia SA22C was used instead of the US Govt mandated extended VIN.JM1FB331 BO######

Model: 1983
Commonly known as Series 2
SA2=RX7 2=1146cc 12a Rotary C=Coupe ###### =Serial/Chassis Number

May 1981 - June 1982
Chassis Numbers 650001 - 700000
In Australia SA22C was used instead of the US Govt mandated extended VIN.JM1FB331 BO######

Model: 1984
Commonly known as Series 3
SA2=RX7 2=1146cc 12a Rotary C=Coupe ###### =Serial/Chassis Number

September 1983 - July 1984
Chassis Numbers 700001 onwards
In Australia SA22C was used instead of the US Govt mandated extended VIN.JM1FB331 BO######

Model: 1985
Commonly known as Series 3
SA2=RX7 2=1146cc 12a Rotary C=Coupe ###### =Serial/Chassis Number

July 1984 - December 1985
Chassis Numbers 700001 onwards
In Australia (and Japan) SA22C was used instead of the US Govt mandated extended VIN.JM1FB331 BO. The FB Prefix was also used on models released in Greece######

Sport $19,490
Delux $20,300
Limited $21,990
Finale $?????? only 150 made,unique black-outs outside of car, badge on pass door trim saying ...#/150 "last of the legends "

Specs on the S3 Sport:
5.5 x 14" steel wheels
no washers on the front bar
no electrics in the interior
No rear wipers
S1 style seats(one piece no head rests)
rear foam spoiler

These sports models were only mentioned in the standard S3 brochure, they had their own "Sports brochure" its black and white.

If anyone's got a copy post it up please.
Image

These are some rare articles from my large road test collection, enjoy..
Take you time and read these , the S3 rx-7 was/is a great sports car!
Image Image

Here is another test with the same car,however this time the rx-7 is up against some very tough competition !
Image Image

Colour Chart
Image

First Gen Competition Manual
1979 Wiring Diagram
First Gen Work Shop Manual
Interesting US First Generation Info
Nissan R31 Struts into first gen RX7
1st Gen Handling Thread
Hard to get brake parts (Mazdatrix USA)


What fits what
Series 1 - Series 2
Wheels both 110mm PCD
Front brakes/hub rotor assy
S2 (55ltr) Fuel Tank to S1 (55ltr) : Best to use sender type specified for each tank for accurate gauge readings.
Diff Centers S1 to S2
Seats S1 - S3
Dash Pads S1 - S3
Tail shaft S1 - S2


What can fit
Rear End Solid Disc Brake S2 to S1 : Requires adaptor hose*.
Brake Master Cylinder S2 to S1 : Requires new brake lines to Metric Fine, also front and rear chambers are opposed.
Clutch Master Cylinder/Slave Cylinder S2-3 to S1 : Requires adaptor hose* or whole variant change... No mix and match!
Gear Boxes S2 to S1 : Requires gear shift hole enlarged to rear.
Motor S2/3 to S1 (long port/extra 10Kw) : Consideration for oil cooler, Distributor/Ignitors.
Rear End Vented Disc Brake S3 to S1-2 : Requires S3 Tail shaft or modified end to S1/S2 shaft. Also requires adaptor hose.
Front Struts S3 to S1-2 (larger front brake rotors) : Requires adaptor hoses*
Steering Column/Shaft/Ignition Lock Housing S2 to S1 : Must be changed as a whole Assy... No mix and match!
Wheels and Bolts S1 to S2 (S2 are much shorter): No mix and match!
Wiring Loom S2 to S1 : Firewall Grommets are round on S1 vs. rectangular (longer) on S2, best to cut out S2 panels as fillers. Rear light plugs are basically the same on S1, S2 and S3.

*Series 1 uses Metric Course threads on the brake and clutch hydraulic systems where S2-3 use Metric Fine Threads. ENZED can usually supply either rubber or ADR approved Braided replacement lines same day.

What won't fit
Pedal Box S2-3 to S1
Brake Booster S2-3 to S1
Front Shock Inserts S2 to S1 (different lengths)
Wheels S1-2 (110mm PCD) to S3 (114.3mm PCD)
Rear Lights S2-3 to a S1
S1/S2 Fuel Tank from S3 as it is larger (S3 has Space Saver spare tyre)

What looks different or visually determines specific models
Image Image
1978 Savanna RX7's some of which found there way to Australia and are different to a S1 by:
    Savanna has chrome number plate light lamps and side repeater/indicators in front guard/s (Aus delivered has no repeaters) Savanna has 180kph on speedo Aus delivered has 210kph
    Originally had wing mirrors (mirrors mounted on front guards)
    Smaller front brakes
    Light weight doors (No side intrusion bars)
    Rear brake drums not ribbed for cooling

Credits
Thank you to the following contributors:
    Jobro engine information
    1980rx-7 colour chart and competition and wiring link manuals
    13BEEF Savanna RX7 information
    BradRX7 Savanna RX7 information & confirmation
    AD RX Series RX7 information & confirmation
    Nickerz Series 3 RX7 Fuel Tank information & confirmation
    1980rx-7 First Generation Workshop Manual Link
    baltsiotis FB Model Prefix Info Greece
    Sammy BSavanna Rear Shot
    R2 CoupeUS First Gen Info


_________________
Going racing on a tight budget
Retro Racer RX7 on FaceBook
Trader Feedback


Last edited by Retro Racer on Sun May 24, 2009 4:23 pm, edited 58 times in total.

Top
 Profile  
 
 Post subject: Re: Mazda RX-7 SA22C (1978 - 1985)
PostPosted: Sun Mar 01, 2009 3:35 pm 
Offline
Epitrochoid Shaped Head
User avatar

Joined: Fri Apr 04, 2003 7:31 am
Posts: 1574
Location: SYDNEY
here is a leaflet which shows the US S3 RX-7 with the factory 6 port EFI 13B engine.

Note, There was two types early(pre S4) EFI 6port 13B's. One for the US market (rx-7) the other for the JDM in the early/mid 80's cosmos.
These EFI 6ports 13B's had 2 injectors not like the S4 6port 13B's.These engines are rare in Australia, in the 90's there was a few around at the importers these days you won't find them. Australian importers mainly had the JDM type 6 port 13B.
The US and JAP 6ports differed by having different logos/castings on the inlet manifolds the JDM had "RE SUPER INJECTION" and the US had "RE EGI"

Mazda leaflet.

Image

ImageImage


US S3 6port EFI 13B road test.

Image
Image


Top
 Profile  
 
 Post subject: Re: Mazda RX-7 SA22C (1978 - 1985)
PostPosted: Tue Apr 28, 2009 8:51 pm 
Offline
Spitting Seals

Joined: Thu Dec 16, 2004 6:59 pm
Posts: 810
Mazda’s Street Racer – Groundwork for a 1980s race program

1716%5F002[1].pdf

4976%5F001[1].pdf


In short, this is the information contained in what appears to be the genesis of the Moffat RX7s.

Only 25 Series 1 RX7 Mirage cars were built, each wearing the distinctive sunrise red livery completed with black striping.

This is a Mazda model, not dealership add ons.

At a cost of $13,995 they were $875 less than the “regular” model!

In the interests of weight saving the air conditioning, radio/cassette player and quartz clock were deleted. Gone too was the distinctive velour interior to be replaced with austere vinyl.

The front was revised with a deep air dam. The bonnet a scoop air intake, the wheel arches were flared and at the rear a full size spoiler fitted.

7 inch wide 60 series Dunlop SP Sport steel radial tyres fitted to their Aunger ‘Hotwire’ mag wheels. The spare wheel is fitted with a Goodrich ‘Spacesaver’ tyre .

A race orientated extended gearshift lever is also fitted.

Interestingly, a prototype of the Mirage was built for Penfold Mazda in Melbourne as a one-off by Peter Arcadipane. This was based on the standard RX7 however, and in addition to the fibreglass bits, it also featured a sliding sun roof. The bonnet scope was not fitted to this car which was white with a blue “Mazda” stripe fitted along the sides.

The spoilers and flares on these 26 cars were based on the full race RX7 exhibited at the Melbourne Motor Show in 1979.

All information taken from “Motor Manual” – Christmas Special 1979.

One of the 25 Mirage RX7s was sold by Phil’s Rotaries last year. Unfortunately it had been fitted with a turbo engine but at one stage I negotiated a potential sale price less the engine for around $5000. The car retained its original livery but had been resprayed. This was the second time the car had been sold by Phils during its life.

I believe it may have been the car photographed on the front of the Motor Manual as Warren from Phils advised the car had spent its early life been sent to dealerships on promotional duties by Mazda.

Warren emailed to me confirmation from Mazda that it was one of the 25 Mirages.

Found a note I made of the details of this car.

July 79 Build
Delivered Feb 80
Sunrise Red, black stripes
Factory flares, spoiler etc
Dealer Demonstrator model
One of twenty six odd Series 1 RX7s imported to Australia “Mirage”. 980 Series 2 Models


Note this information contained in a post on this forum under Hansford RX7. This may be the white prototype as in the above pdf.
Post subject: Re: Wanted: Old Series 1 Greg Hansford Special Rx7Posted: Wed Jul 16, 2008 7:06 pm


Rotor Junkie


Joined: Sat Aug 10, 2002 5:43 am
Posts: 4802
Location: REACT, Canberra There did seem to be a factory demonstrator that was a group c type body kit on an s1. There was one for sale or year or two back in Geelong or similar, apparently had supporting documentation. I'd almost be interested in a s1 version as it would almost be eligible for historic rego!

'Tweety' sold one a while back with a 12aT that was apparently a Hansford special - also had the body kit and a leather interior. Was dark grey.

The problem is that some of these are not Mazda Factory things as such but local dealer 'specials' so it is sometimes hard to authenticate just what they are and if indeed they are something special.





I was also advised up to 150 Series 2 Mirages may have been built but I cannot confirm this advice.


Last edited by R2Coupe on Thu Apr 30, 2009 7:30 pm, edited 7 times in total.

Top
 Profile  
 
 Post subject: Re: Mazda RX-7 SA22C (1978 - 1985)
PostPosted: Tue Apr 28, 2009 9:45 pm 
Offline
Epitrochoid Shaped Head
User avatar

Joined: Fri Apr 04, 2003 7:31 am
Posts: 1574
Location: SYDNEY
R2Coupe wrote:
Warren emailed to me confirmation from Mazda that it was one of the 25 Mirages.



i would be interested to see this


Top
 Profile  
 
 Post subject: Re: Mazda RX-7 SA22C (1978 - 1985)
PostPosted: Tue Apr 28, 2009 11:28 pm 
Offline
Get a Girlfriend
User avatar

Joined: Mon Mar 28, 2005 6:19 pm
Posts: 2680
Location: Sydney Inner West
Thanks guys, I'll add this ASAP.

_________________
Going racing on a tight budget
Retro Racer RX7 on FaceBook
Trader Feedback


Top
 Profile  
 
 Post subject: Re: Mazda RX-7 SA22C (1978 - 1985)
PostPosted: Wed Apr 29, 2009 1:26 am 
Offline
The Bug Has Bitten
User avatar

Joined: Thu Dec 23, 2004 6:58 pm
Posts: 467
Location: Canberra
Retro Racer wrote:
Sport $19,490
Delux $20,300
Limited $21,990
Finale $?????? only 150 made,unique black-outs outside of car, badge on pass door trim saying ...#/150 "last of the legends "


Whats the difference between the deluxe and limited s3?


Top
 Profile  
 
 Post subject: Re: Mazda RX-7 SA22C (1978 - 1985)
PostPosted: Wed Apr 29, 2009 9:13 pm 
Offline
Spitting Seals

Joined: Thu Dec 16, 2004 6:59 pm
Posts: 810
AD RX wrote:
R2Coupe wrote:
Warren emailed to me confirmation from Mazda that it was one of the 25 Mirages.



i would be interested to see this


Unfortunately I have deleted the email from my system. The email from Mazda confirmed that the car (VIN was provided and the car manufactured in 1979) was as specified by Phils Rotaries ie Mirage Mazda.

Warren is extremely reliable and has always provided accurate advice, service and genuine Mazda parts.


Last edited by R2Coupe on Fri May 01, 2009 11:04 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: Mazda RX-7 SA22C (1978 - 1985)
PostPosted: Fri May 01, 2009 1:26 am 
Offline
Epitrochoid Shaped Head
User avatar

Joined: Fri Apr 04, 2003 7:31 am
Posts: 1574
Location: SYDNEY
I may have falsely quoted some of the FINALE details in this thread,
1) i quoted that the build plate say #/150, it clearly only shows the build number only and NOT the total production number which is still unclear, the letter provided by ROTAME states in one sentence that 25 were made, then in the second sentence it mentions 25 were made in NSW.
was the Finale a NSW MAZDA thing?
Did Mazda make 25 for each state?

2) The positioning of the plate is now up for question. I quoted that it should be on the passenger side door trim as my FINALE's plate ( I owned No2 )was on the passenger side door trom just like the one below ,I save this pic from carsales, however ROTAME owns No8 and his plate is on the dash, now I suggested that his plate may have been moved when the doortrims were retrimed(possibly) however ROTAME recalls seeing another Finale where the plate was also on the dash?!
where these plates fitted by dealers or Mazda( I would assume mazda) if dealers whre fitting them then MAYBE each dealer had their own specifi position where they fitted the plates.


anyhow to this date i have not seen a build number higher then 16..so MAzda may have only made 25 as the letter states !!! these things are rarer then i thought !!!!!!!!!

Image

Image


ROTAME's FINALE plate

Image


IF anyone has Finale info please post it up !!!!!!


Top
 Profile  
 
 Post subject: Re: Mazda RX-7 SA22C (1978 - 1985)
PostPosted: Sun May 03, 2009 12:14 pm 
Offline
Epitrochoid Shaped Head
User avatar

Joined: Fri Apr 04, 2003 7:31 am
Posts: 1574
Location: SYDNEY
74gt wrote:
Retro Racer wrote:
Sport $19,490
Delux $20,300
Limited $21,990
Finale $?????? only 150 made,unique black-outs outside of car, badge on pass door trim saying ...#/150 "last of the legends "


Whats the difference between the deluxe and limited s3?


here you go.

Image


Top
 Profile  
 
 Post subject: Re: Mazda RX-7 SA22C (1978 - 1985)
PostPosted: Mon May 04, 2009 1:37 am 
Offline
Get a Girlfriend
User avatar

Joined: Mon Mar 28, 2005 6:19 pm
Posts: 2680
Location: Sydney Inner West
Good work mate :) I'll get all this added ASAP.
I hereby crown thee S3 Guru 8)

_________________
Going racing on a tight budget
Retro Racer RX7 on FaceBook
Trader Feedback


Top
 Profile  
 
 Post subject: Re: Mazda RX-7 SA22C (1978 - 1985)
PostPosted: Sun May 10, 2009 1:38 am 
Offline
The Bug Has Bitten
User avatar

Joined: Thu Dec 23, 2004 6:58 pm
Posts: 467
Location: Canberra
AD RX wrote:
74gt wrote:
Retro Racer wrote:
Sport $19,490
Delux $20,300
Limited $21,990
Finale $?????? only 150 made,unique black-outs outside of car, badge on pass door trim saying ...#/150 "last of the legends "


Whats the difference between the deluxe and limited s3?


here you go.



Thanks mate. I was just trying to find out whether I had a limited s3 or a deluxe s3. I have a Limited s3, however every other s3 I've seen have had a leather wrapped steering wheel, mine is all rubber. :-k


Top
 Profile  
 
 Post subject: Re: Mazda RX-7 SA22C (1978 - 1985)
PostPosted: Wed May 13, 2009 12:35 am 
Offline
Epitrochoid Shaped Head
User avatar

Joined: Fri Apr 04, 2003 7:31 am
Posts: 1574
Location: SYDNEY
when the leather wears it looks shit so what people do is remove the leather(cut the stiching) and simply peel off the leather...and bingo a brand new rubber wheel. :lol:


Top
 Profile  
 
 Post subject: Re: Mazda RX-7 SA22C (1978 - 1985)
PostPosted: Wed May 13, 2009 12:09 pm 
Offline
Get a Girlfriend
User avatar

Joined: Mon Mar 28, 2005 6:19 pm
Posts: 2680
Location: Sydney Inner West
I wonder if that's why my S1 Wheel feels like rubber, but has that stiched look/imprint

_________________
Going racing on a tight budget
Retro Racer RX7 on FaceBook
Trader Feedback


Top
 Profile  
 
 Post subject: Re: Mazda RX-7 SA22C (1978 - 1985)
PostPosted: Wed May 13, 2009 6:48 pm 
Offline
Epitrochoid Shaped Head
User avatar

Joined: Fri Apr 04, 2003 7:31 am
Posts: 1574
Location: SYDNEY
Roland,

Add this to the first post and maybe start a separate section in the first post for the FINALE model. I know the info is incomplete at the moment but we can always add to it.

Finale decal info:(THANKS TO ROTAME)


Image

Image

Image


Top
 Profile  
 
 Post subject: Re: Mazda RX-7 SA22C (1978 - 1985)
PostPosted: Wed May 13, 2009 6:49 pm 
Offline
Epitrochoid Shaped Head
User avatar

Joined: Fri Apr 04, 2003 7:31 am
Posts: 1574
Location: SYDNEY
Retro Racer wrote:
I wonder if that's why my S1 Wheel feels like rubber, but has that stiched look/imprint


i didn't think S1 had leather wheel? :oops:


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 114 posts ]  Go to page 1, 2, 3, 4, 5 ... 8  Next

All times are UTC + 10 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group