All times are UTC + 10 hours [ DST ]




Post new topic Reply to topic  [ 1 post ] 
Author Message
 Post subject: ignition timing for RX7 Series 3
PostPosted: Thu Sep 14, 2017 5:15 pm 
Offline
Rotary?... What The?

Joined: Sun Mar 05, 2017 4:57 pm
Posts: 30
I lost the timing position by installing a new pick up for the ECU modules.I'm not sure how to set the timing,the distributor is the tall one.Any Ideas on this? i do not have a manual. I got it sorted,I found the index mark above the drive gear & lined it up with the timing mark,had to remove codder pin to remove timing wheel to replace new pick up.Then insert dowl pins on advance weights into drive slots.connected advance vaccum arms & set trailing marks on pick up to 5 degree mark.I'll see what happens when the dissy is in place. No luck,wont start.Is there a timing mark on the front rotor that needs to be aligned with the first pully mark in the leading spark plug hole?considering the crank shaft turns 3 times to 1 turn of the rotor? Also, is there a test to see if the ECU ignitors are working by using a multi meter or test light & how many ohms or volts to test for ?


Top
 Profile E-mail  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC + 10 hours [ DST ]


Who is online

Users browsing this forum: Google [Bot] and 13 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group